Bulletins 1-65-94 thru 18-99
Instructions
Use links below to browse through a list of the NAPCA specification bulletins. Once you select a bulletin to view, click on its name and you will be taken to that bulletin.
Disclaimer
These specifications may be used in whole or in part by anyone without prejudice, if recognition of the source is included. The National Association of Pipe Coating Applicators (NAPCA) assumes no responsibility for the interpretation or use of these specifications. The intended use of the coatings identified herein is to provide corrision protection for buried pipelines. Above ground storage of coated pipe in excess of six months without additional Ultraviolet protection is not recommended.
The Pocket Edition of National Association of Pipe Coating Applicators Specifications and Plant Coating Guide last revised December 1994 is no longer to print and is not current. The only NAPCA approved specifications are those identified and listed below.
Table of Contents
 |
Bulletin 1-65-94 |
Recommended Specification. Designations for Coal Tar Enamel Coatings
|
|
Bulletin 2-66-94 |
Standard Applied Pipe Coating Weights for NAPCA Coating Specifications |
|
Bulletin 3-67-94 |
External Application Procedures of Hot Applied Coal Tar Coatings to Steel Pipe |
|
Bulletin 5-69-94 |
NAPCA Specifications for Pipeline Wrappers |
|
Bulletin 6-69-94-1 |
Suggested Procedures to Hand Wrap Field. Joints using Hot Enamel |
|
Bulletin 6-69-94-2 |
Suggested Procedures for Coating Girth Welds with Fusion Bonded Epoxy |
|
Bulletin 6-69-94-3 |
Suggested Procedures for Coating Field Joints, Fittings, Connections and Pre-fabricated Sections using Tape Coatings |
|
Bulletin 6-69-94-4 |
Suggested Procedures for Field Joint Application using Mastic Mix and Field Mold |
|
Bulletin 6-69-94-5 |
Suggested Procedures for Coating Field Joints using Heat Shrinkable Materials |
|
Bulletin 12-78-04 |
External Application Procedures For Plant Applied Fusion Bonded Epoxy (FBE) Coatings And Abrasion Resistant Overlay (ARO) Coatings To Steel Pipe |
|
Bulletin 13-79-94 |
External Application Procedures for Coal Tar Epoxy Protective Coatings to Steel Pipe |
|
Bulletin 14-83-94 |
External Application Procedures for Polyolefin Pipe Coating Applied by the Cross Head Extrusion Method or the Side Extrusion Method to Steel Pipe |
|
Bulletin 15-83-94 |
External Application Procedures for Plant Applied Tape Coating to Steel Pipe |
|
Bulletin 16-94 |
Recommended Practice for Surface Cleanliness of Pipe as Received at the Coating Plant |
|
Bulletin 17-98 |
FBE Anomalies Trouble-Shooting Guide |
|
Bulletin 18-99 |
Application Procedures for Concrete Weight Coating Applied by the Compression Method to Steel Pipe |
|
